Home / News

leather office chair with footrest product composition

Office chair refers to various chairs equipped for the convenience of work in daily work and social activities. The office chair is divided into narrow and broad sense. The narrow sense of the office chair refers to the back chair that people sit on when they are working on the desktop in the sitting position. Reception chairs, staff chairs, conference chairs, visitor chairs, training chairs, etc.

office chair Category:

        From the perspective of material composition, it can be divided into: leather office chairs, PU leather office chairs, cloth office chairs, mesh office chairs, plastic office chairs, etc.

        From the type of use, it can be divided into: boss chairs, work chairs, staff chairs, supervisor chairs, conference chairs, guest chairs, ergonomic chairs, etc.

        From the perspective of use, there are mainly offices, open staff offices, conference rooms, reading rooms, library and reference rooms, training classrooms, laboratories, staff dormitories, staff canteens, etc.

The basic composition of leather office chair:

1: Casters: ordinary casters, PU wheels (soft materials, suitable for wooden floors, and machine rooms).

2: Chair feet: The thickness of the iron frame directly affects the service life of the chair. Surface treatment: polishing, spray painting, baking paint (surface gloss, not easy to peel off paint), electroplating to delete the atlas (wood frame can not be electroplated), the electroplating quality is good, so it is not easy to rust.

3: Air bar: also called extension bar, used to adjust the height and rotation of the chair.

4: Chassis: hold up the part of the seat, and connect with the gas rod below.

5: Seat: It is composed of wood, sponge and fabric. The quality of wood panels is usually not felt by consumers. Sponge: regenerated cotton, new cotton. 99% of manufacturers use the two together. The thicker and harder it is, the higher the cost. The thickness is appropriate and the hardness is appropriate. Press the seat by hand, Material: hemp, mesh, leather. Plastic frame pressed with net cloth. This type of chair is more breathable.

6: Armrest: Thickness affects the quality.

7: Seat back seat connection (corner code): Seat seat and seat back are separated and connected by steel pipe or steel plate, the steel plate is usually 6mm or 8mm thick. However, steel plates with a width of less than 6cm must be 8mm thick.

8: Chair back: Steel frame frame, plastic frame chair, made of a combination of mesh, with breathability.

9: Lumbar pillow: reflect the comfort of the chair.

10: Headrest: Express the comfort of the chair.

The above is the introduction of leather office chair with footrest products